| Sr. No. | Specifications | Chemistry |
|---|---|---|
| 1 | 3.7V 2Ah | NMC |
| 2 | 3.7V 2.2Ah | NMC |
| 3 | 3.7V 4.4Ah | NMC |
| 4 | 7.4V 2.2Ah | NMC |
| 5 | 7.4V 4.4Ah | NMC |
| 6 | 7.4V 4.4Ah | NMC |
| 7 | 11.1V 2.2Ah | NMC |
| 8 | 11.1V 2.5Ah | NMC |
| 9 | 11.1V 5Ah | NMC |
| 10 | 11.1V 7.5Ah | NMC |
| 11 | 14.8V 2.2Ah | NMC |
| 12 | 14.8V 2.5Ah | NMC |
| 13 | 14.8V 5Ah | NMC |
Medical devices need power that is steady, compact and ready when needed. Match your device to a pack voltage from the range above.
Pulse oximeters, digital thermometers and other pocket-size tools that must be light and easy to carry.
Blood pressure monitors and portable patient monitors that need steady power for long readings.
Portable ECG and ultrasound units used at the bedside, in clinics and during home visits.
Nebulizers, portable suction units and other motor-driven equipment that needs higher voltage.
Examples are for guidance only. Always choose a pack that matches your device manufacturer's specification.
Two numbers decide it: the energy the pack stores and the power your device draws.
Energy (Wh) = Voltage (V) × Capacity (Ah)
Run time (hours) ≈ Energy (Wh) ÷ Device power (W)
A 7.4 V, 4.4 Ah pack stores 7.4 × 4.4 = 32.6 Wh. A portable monitor that draws 5 W runs for about 32.6 ÷ 5 = 6.5 hours. Real run time is a little lower because of conversion losses and screens, pumps or motors switching on.
| Specifications | Energy | Run Time at 5 W |
|---|---|---|
| 3.7V 2Ah | 7.4 Wh | about 1.5 hours |
| 7.4V 2.2Ah | 16.3 Wh | about 3.3 hours |
| 7.4V 4.4Ah | 32.6 Wh | about 6.5 hours |
| 11.1V 5Ah | 55.5 Wh | about 11 hours |
| 11.1V 7.5Ah | 83.3 Wh | about 16.7 hours |
| 14.8V 5Ah | 74 Wh | about 14.8 hours |
Approximate figures for a steady 5 W draw. Check your own device's power use.
A battery inside a medical device has to be consistent from the first pack to the thousandth. These are the points worth confirming before you order.
Cells with similar capacity and voltage wear evenly and give consistent run time.
Confirm it guards against overcharge, over-discharge, overcurrent and short circuit.
Ask which test reports, datasheets and safety documents come with the pack.
Clear labels let you trace any pack back to its production batch.
The pack you approve should be the pack you receive on every later order.
Lithium batteries follow transport rules, so ask what documents travel with your order.
Medical approval of the finished device is the device maker's responsibility. Ask us what documents we can provide for your pack.
Standard packs from the range above work for many devices. When yours is different, tell us what you need.
Cell layout arranged to fit the space inside your housing.
Connector type and wire length chosen to match your device.
Series and parallel combinations for the run time you need.
Wrapped or housed packs with labels carrying the details you require.
Options vary by order. Confirm what is possible for your quantity and design.
Use the voltage your device's circuit is designed for. Each cell is 3.7 V, so 2 cells give 7.4 V, 3 cells give 11.1 V and 4 cells give 14.8 V. Then choose the Ah for the run time you need.
Yes, if the device has a charging circuit made for lithium-ion at the pack voltage. Share your charging design and we will check it matches.
Please contact us with your requirement and we will tell you what sampling is possible.
Keep them partly charged in a cool, dry place and top them up every few months. Avoid heat, direct sun and storing them fully empty.
Stop using it, do not charge it, and replace it. Keep it away from heat and dispose of it through a proper battery recycling point.
Send us your voltage, capacity, size and quantity. We will recommend a pack from our range or design one for you.
Steady voltage helps sensitive electronics give accurate readings.
Protection against overcharge, deep discharge and short circuit.
High energy density keeps devices small and comfortable to carry.
Many recharge cycles reduce waste and running cost.
Tell us the voltage, capacity, size and run time your device needs.
We suggest a pack from our range or design one to fit your device.
You test the sample in your device and share your feedback.
Once approved, we supply in the quantities you need.