| Sr. No. | Specifications | Chemistry |
|---|---|---|
| 1 | 3.7V 2Ah | NMC |
| 2 | 3.7V 2.2Ah | NMC |
| 3 | 3.7V 4.4Ah | NMC |
| 4 | 7.4V 2.2Ah | NMC |
| 5 | 7.4V 4.4Ah | NMC |
| 6 | 7.4V 4.4Ah | NMC |
| 7 | 11.1V 2.2Ah | NMC |
| 8 | 11.1V 2.5Ah | NMC |
| 9 | 11.1V 5Ah | NMC |
| 10 | 11.1V 7.5Ah | NMC |
| 11 | 14.8V 2.2Ah | NMC |
| 12 | 14.8V 2.5Ah | NMC |
| 13 | 14.8V 5Ah | NMC |
Engineered for reliability, our ESS inverters ensure a seamless power supply during outages. With high efficiency, fast switchover, and long battery life, they keep your appliances running smoothly—at home or in business settings.
Our NMC lithium battery packs are built to replace bulky lead-acid batteries, giving your inverter more backup time in a much smaller, lighter body.
Handles many more charge and discharge cycles than lead-acid, so you replace batteries far less often.
Recharges quickly after an outage, so you are ready for the next power cut sooner.
High energy density means a smaller, lighter pack that is easy to install on a wall or shelf.
No water topping, no acid fumes and no terminal corrosion. Fit it once and forget it.
| Feature | Our Lithium | Lead-Acid |
|---|---|---|
| Battery Life | Long | Short |
| Weight | Light | Heavy |
| Charging Time | Fast | Slow |
| Maintenance | None | Regular |
| Efficiency | High | Moderate |
| Space Needed | Small | Large |
From a single room to a full shop, our battery range covers the voltages and capacities listed above, so you can pick the right fit for your load.
A battery stores energy in watt-hours (Wh). Add up what you want to run, then pick a pack that covers it.
Energy (Wh) = Voltage (V) × Capacity (Ah)
Backup time (hours) ≈ Energy (Wh) ÷ Load (W)
| Device | Power |
|---|---|
| LED bulb | 5 – 10W |
| Wi-Fi router | 8 – 12W |
| BLDC ceiling fan | 25 – 35W |
| CCTV camera | 5 – 15W |
| LED TV | 50 – 100W |
| Laptop | 40 – 65W |
Check the label on your own devices for exact figures.
The Battery Management System watches each cell and cuts power the moment something looks wrong.
Stops charging when cells are full, which protects battery health.
Disconnects the load before cells drain too far, so the pack lasts longer.
Cuts the output instantly if a wiring fault or overload occurs.
Pauses charging or discharging if the pack gets too hot or too cold.
On top of this, every pack is tested for voltage, internal resistance, performance and safety before it leaves our Delhi facility.
Tell us your setup
Share your inverter voltage, the devices you run, and how many hours of backup you need.
Get the right pack
We suggest the voltage and capacity that fit your load and confirm compatibility with your inverter.
Install and enjoy
Connect the pack, switch on, and enjoy longer backup with no maintenance. Our team supports you after installation.
In most cases yes, if the pack voltage matches your inverter and its charger supports lithium. Send us your inverter model and we will confirm before you buy.
Lithium packs handle many more charge cycles than lead-acid. Exact life depends on how deeply and how often you use it. Ask us for the cycle rating of the model you choose.
Yes. Each pack has a BMS with overcharge, deep-discharge, short-circuit and temperature protection, and is tested before dispatch.
Yes. If your need is not in the specification table, contact us and our team will design a pack for it.